UV CARE Super Power Vacuum – BLACK

PHP 9,500

Available!

Loading the best price for you

(See if you qualify here)

Description

RANGE OF APPLICATION: Beds, Mattresses, Pillows, Sofas, Clothing, Fabrics, Bed Sheets, Blankets, Duvets, Upholstery, Carpets, Rugs and Play Mats Do not use directly on skin or animals.

FEATURES:
– Powerful UV-C Lamp
– Medical-grade, high-efficiency HEPA Filter
– Two safety wheel switch to prevent exposure to UV-C light
– Rechargeable Lithium Battery
– High Power UV Lamp: 31 cm
– Rated Power: 100W
– Rated Voltage: 18.5W
– Vacuum: 5kPa
– Noise: 70dB
– Dust Cup Capacity: 0.5L
– Product Dimensions: 41 cm (L) x 32 cm (W) x 20 cm (H)
– Weight: 1.4kg
– Comes with 1 year service warranty with 3 months warranty for the lamp

HOW TO USE:
– Press the power button to turn on the unit.
– Place the vacuum flat on the bed or surface. This will then turn on the UV-C lamp. You will be able to check if the UV-C
light is working through the light indicator on the machine.
– Glide the vacuum back and forth on your bed or sofa to clean.
– There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut
down to protect the motor and machine. You must rest the machine for about half an hour to restart again.

HOW TO CLEAN THE DUST CYLINDER AND HEPA FILTER:
– Turn off the machine.
– Carefully pull out the dust cylinder
– Use water to clean the dust cylinder. Rinse the filter to clean or use a small brush to remove stubborn dust and dirt.
– Make sure that the dust cylinder and filter is completely dry before installing back to the machine.
– Never install a wet dust cylinder or wet filter to the machine as this will damage the motor.
– Clean the dust cylinder and filter every after use. This will help to prolong the machine life.
– If the UV Lamp is dirty, air out the dust and use a soft cloth with alcohol to wipe clean.

HOW TO CHARGE:
– Plug the power adapter to the charging base.
– Place the vacuum cleaner into the charging base to charge.

MAINTENANCE:
– There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut
down to protect the motor and machine. You must rest the machine for about half an hour to restart again.
– Avoid touching the UV lamp with your fingers because the stain will affect the sterilization.
– Regularly clean the HEPA filter and contact your authorized dealer for filter replacement.
– Please do not open or disassemble the machine as this will void your warranty.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “UV CARE Super Power Vacuum – BLACK”

You have not viewed any product yet.